Roof Cladding Plan - Representation

Display Point Coordinates: The coordinates can be displayed for each endpoint of a roof skin line. The X, Y and Z coordinates can be switched separately. Lines that are smaller than the minimum line length are not taken into account.

Display batten: If the check mark is set, the upper edges of the battens will be displayed, if battens have been entered.

Represent Bricks: If bricks have been entered, they can be displayed on the plan. The side and bottom edges of each brick are drawn.

Display chimney: With this switch, the chimney itself can be displayed, otherwise only the opening in the roof cladding is visible.

Drawing elements: The auxiliary geometry that has been entered or read into the roof structure is displayed in the roof panel plan.

Show roof area number: Each roof area can be labeled. One element of this inscription is the roof area number. If each roof surface is shown individually, the number is in the text field.

Show roofline number: Each roofline has a unique number. With this option, you can switch on the line numbers, for example, to simplify the assignment to the measurement list.

Show roof area size: The size of the roof area can be displayed in the label of each roof area. The area size consists of the area of the layer shown minus the openings that are greater than or equal to the minimum take-off area. If each roof surface is displayed individually, the roof area size is displayed in the text field.

Display opening area size: The label can display the sum of all openings in the displayed layer that are greater than or equal to the minimum take-off area. If each roof surface is displayed individually, the opening area size is displayed in the text field.

Show area size: If this option is turned on and an option has been selected at the bottom to display the area areas, the size of the area areas will be displayed on the roof panel plan.

Show Roof Pitch: The roof pitch is displayed in the label of each roof surface. If each roof surface is displayed individually, the roof pitch is displayed in the text field.

[]{#Linienlänge .anchor}Show line lengths: The true length of the rooflines can be displayed. Lines that are smaller than the minimum line length are not taken into account.

Floor plan to be displayed: A floor can be selected from the current position or the house contour.

Units of Measurement: In this field, you select the setting for the units of measurement to be used for the labels. This setting has no influence on the measurement chains. Their unit is determined by the dimension style.

Text Style Annotations: For the annotations in the roof plan, a text style can be selected for all annotations.

Text Style Text Field: A text style can be selected for the text field in the roof plan.

Representation in a drawing: On a drawing, the entire roof can be shown in the plan view or a single area in the true size.

Layer contour to be displayed: This list is used to switch the layer contour that is to be displayed on the plan. Only one layer can be switched on.

Displaying roof areas: If roof areas have been calculated in the model area 'Roof Coverage' (function 'Canopy areas'), you can set here which areas are to be displayed.

Minimum line length: The minimum line length can be set here for labeling the line length and the point coordinates.

Minimum take-off area: Openings that are smaller than the minimum take-off area are overmeasured. Larger openings are subtracted from the roof area size and specified as the opening area.