Autowand

Function for quickly creating the basic structure for half-timbered or timber-frame construction in walls. At the touch of a button, the components of the basic structure are created in one or more walls; these can then be further processed like any other component.

• In the floor plan, walls can be selected as for HRB occupancy: all walls, all exterior walls, all interior walls, wall selection. See also the above chapter: Setting attributes for wall ends based on the order of wall selection.

Layer contours:

• The layer contours are created by applying AutoWall. Previous changes to the layer contours are discarded.

• The layer penetration is set so that layer 0 always extends to layer 0 of the partner wall. Therefore, any continuous stiffening planking is not taken into account.

• The remaining layers are created in a similar way to how they intersect in the original form: Layer 2 intersects layer 2 for cutting and cut. The layers therefore overlap at the corners.

Production of components:

• A material is specified for all components.

• The cross-sectional height automatically corresponds to the thickness of layer 0.

• Specify cross-sectional width:

  • corner post

  • Door-window jambs

  • Threshold - frame

  • Standard width for all other components

• Posts created:

  • Corner post (turned corner post yes/no)

  • End post for T-joint and counter post in the partner wall

  • Door-window jambs

  • Door-window: lintel and parapet bar

  • Posts at sloping corners and ends are executed at right angles

• Frame threshold:

  • 1 Mercy

  • 1 threshold

  • Selection yes/no for compensation threshold, which then has the same length as threshold

• The input values ​​are taken from the default values ​​if the Dietrich's standard variables are used in the default values.

The further adjustment of the components is then carried out using the usual functions of DiWand 3D, in particular:

• Cross-sectional change

• Push component

• Adjust lengths

• Add connections