Block Construction Execution

Block Construction Execution

A block construction execution, like an HRB file, contains all the information for covering the walls and connecting the bars. A block construction execution therefore contains all the settings for various areas (e.g., wall structure, window opening, etc.).

A name is assigned to each block construction execution.

Block Construction Execution - Wall Construction

All settings for the construction of walls are listed in the list. The browser button branches to the dialog box for creating and editing wall structures.

The settings in the dialog box for the wall structures are saved with a unique name, and these settings are then available again in the definition of the block construction execution.

Log Identification Number: Enter the component identification number for the layer in which the components are to be created here.

The identification number can also be selected in this field using the 'Shortcut' function.

The browser button can be used to branch to the Master Database dialog box. Only components of the bar, profile bar, and slab component types are displayed here. However, the identification number must be linked to a profile description.

Rise: Since the components overlap in log construction and the full component height is determined by the identification number, the deck width of the selected log must be specified here.

Layer: Specify the layer in which the components are to be created here.

Depth Position: This drop-down list determines the position of the log in the layer.

Threshold Identification Number: Enter the identification number for the threshold here. The same conditions apply as for the log's identification number.

Slope: Enter the deck width of the sleeper, as for regular planks.

Layer: Specify the layer in which the sleeper should be created.

Depth Position: This drop-down list determines the position of the sleeper in the layer.