Wall Attributes

A wall has attributes for the left, right, top and bottom wall end. This also applies if no attributes have been assigned. In that case the attributes are set to 'automatic'.

The attributes allow you to determine how the respective wall end can be executed constructively. For each attribute you define in the HRB editor how the end should appear with that attribute.

If an HRB file is selected in the upper field 'HRB-Preload', the various HRB types are displayed in the lower drop-down lists with concrete designations from that HRB file. Without HRB preload only the designation 'Type 1', 'Type 2', etc. is shown.

Wall end left / right: For the left and right wall end you select for wall corners whether the wall continues (intersecting) or steps back (cut). At a classic HRB wall corner one wall is always intersecting and the other is cut. For free wall ends you can choose an HRB type. These types are defined in the HRB editor.

Upper / Lower connection: For the upper and lower connections you can likewise select various HRB types that you configure in the HRB editor. Through these types you determine how many frames or sills should be generated and how far the claddings project or step back.