Roof Windows - Interior Lining

Select setting: In the list (or tree, depending on grouping) one of the already saved settings can be selected. Using the icon with the floppy disk, the values from the dialog box are saved under the name that appears in the list. The icon to cancel the reduction is not available here. Further information on managing settings can be found under 'Save settings' in the 'General Help' manual.

Ident number: The field is used to enter the identification number for the components of the interior lining. Only components of the component types beam and plate may be used.

Interior lining up to: This list sets up to which layer of the roof surface execution the interior lining should be generated.

Orientation top: Here the orientation of the upper part of the interior lining is set. With the settings angled + horizontal and angled + vertical the interior lining is generated in two parts.

Orientation bottom: Here the orientation of the lower part of the interior lining is set. With the settings angled + vertical and angled + horizontal the interior lining is generated in two parts.

Recess in length: The recess specifies the distance from the outside of the window frame to the inside of the interior lining. The value is calculated from the nominal length of the window minus the interior reveal clear dimension. This value is then divided by two.

Recess in width: The recess specifies the distance from the outside of the window frame to the inside of the interior lining. The value is calculated from the nominal width of the window minus the interior reveal clear dimension divided by two.

Thickness: The thickness of the interior reveal.

straight segment of the interior lining: The value indicates the length of the part of the interior lining that connects to the window frame at the top and bottom. The value is only used if the option 'angled + horizontal' or 'angled + vertical' was selected for the upper or lower orientation.

Using the 'Save' button, the current settings of the dialog box are saved under the name that appears in the list. Using the 'Cancel' button the settings are not saved.