Roof Determination - Table

are adopted. Profiles can be selected by entering the position number. Using the button at the right edge of the field, profiles can be chosen from a list with preview, modified, or new profiles created.

When you select a profile position, the roof pitch, roof overhang, eave height and specification are taken from the profile. These fields are therefore locked and only released again after the position number has been deleted.

Roof pitch: Enter the roof pitch. Using the button at the right edge of the field, the roof pitch can be entered by a plan distance and a height.

Roof overhang: Enter the roof overhang on this house side.

Eave height: Enter the eave height. An 'eave height' can also be entered on a gable side (roof pitch = 90°). If you also assign a specification to this house side, the vertical layer panels are generated from this 'eave height'. This allows you to obtain the measurement areas on a gable side.

ROOFS: Up to 9 roof breaks can be defined using a base dimension or a break height and a roof pitch. Each roof surface created by a roof break can have its own specification.

Implementation: Here you can select the roof-surface specification.