screen elements

Selection of views: Here the views and their layout can be selected. Available views are the main view, the vertical section and the horizontal section. While work is performed in the main view, the vertical and horizontal sections are continuously displayed as checks.

Proportion vertical section / horizontal section: The window width for the vertical and horizontal sections is specified as proportions of the graphics window: 0.1 therefore means 10% of the respective width.

Representation in section windows: In the two section windows either a section can be displayed or a view of the wall. If the option 'Section' is chosen, you will see the section planes that can be set with the functions File - Settings - Section height and File - Settings - Vertical section. With the option 'View' the "section windows" no longer show a section representation but the view of the wall from above (lower section window) and from the left (right section window).

Area in front of / above building element: With this value an area in front of the wall can be defined that is also to be shown in the wall view. With the value 0.000 a slice is cut from the building that has the thickness of the wall. The components that lie within this slice can be shown in the wall construction. The value set here makes the slice thicker forward.

Area behind / below building element: With this value an area behind the wall can be defined that is also to be shown in the wall view. With the value 0.000 a slice is cut from the building that has the thickness of the wall. The components that lie within this slice can be shown in the wall construction. The value set here makes the slice thicker backward.