# Automatic Post Shift

After generating the thresholds and frames, the corner posts are created first, followed by the opening posts and finally the divider posts and field posts. Depending on the situation, a divider or field post may collide with a corner or opening post.

In such a case, since version 17.01 the divider posts are automatically shifted. If more than 0.01 m of the cross-section lies outside the impacted component (corner post, opening post), the divider post is created and shifted so that no collision remains. This prevents exposed panel joints.

Since version 19.02 the same automatic shifting is also applied to the field posts.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.dietrichs.com/dietrichs-intelligent-documentation/docs-de-en/holzrahmenbau-kompendium/prinzipien-des-hrb-systems/automatische-pfostenverschiebung.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.