> For the complete documentation index, see [llms.txt](https://docs.dietrichs.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.dietrichs.com/dietrichs-intelligent-documentation/docs-de-en/design-program/modellbereiche/wandkonstruktion/einstellungen.md).

# Settings

**File - Settings - Cut Height**

The cut height for the horizontal section can be entered graphically with the mouse.

**File - Settings - Vertical Section**

The position for the vertical section can be entered graphically with the mouse.

**File - Settings - Thresholds**

Thresholds for the automatic generation of components can be configured here.

**Minimum timber length with full cross-section**: When generating a strip, only components that are longer than the previously selected minimum length and have a full cross-section are retained.

**Search area outside the wall**: Normally a component ends at the wall boundaries. It should also be automatically connected to components that are not in the current wall but in an adjacent wall. These components are detected as a boundary if they lie within the search area. The search area shifts the wall boundary parallel by the specified values.

**Minimum line length for core layer contours**: By intersecting the walls with the roof, small corners and spikes can form on the walls. These corners are undesirable in most cases. The program can automatically remove such wall corners. For this purpose, specify up to which line length the segments of the layer contours should be deleted. The subsequent contour lines are adjusted automatically.

**Minimum line length for shell layer contours**: For removing unwanted corners in the contours, a distinction is made between core layers and shells, as different settings can sometimes be useful.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter, and the optional `goal` query parameter:

```
GET https://docs.dietrichs.com/dietrichs-intelligent-documentation/docs-de-en/design-program/modellbereiche/wandkonstruktion/einstellungen.md?ask=<question>&goal=<endgoal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is optional and describes the broader end goal you are ultimately trying to accomplish on behalf of the user. GitBook uses it to tailor the answer towards what is most useful for that goal.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.