# Formwork and Sheathing - Stock Lengths

For formwork boards, specific stock lengths are often available, e.g. from 3.0 m in increments of 0.3 m, but not all lengths should be used. You can create all stock lengths for an identification number and then use a toggle to set which ones are to be used at present.

This switching applies to the moment of allocation, not to the moment of defining the allocation. Thus, if in the allocation definition 'use stock lengths' is set to 'Yes', the stock lengths available at that moment will be used during allocation.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://docs.dietrichs.com/dietrichs-intelligent-documentation/docs-de-en/design-program/modellbereiche/dach/dachbereiche/schalung-und-beplankung/schalung-und-beplankung-lagerlangen.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.